Basic introduction of butadiene green rubber 1
source:未知 author:admin time:2021-11-04 10:42:06 Browse times
Nitrile butadiene rubber is obtained from emulsion polymerization of butadiene and acrylonitrile. Nitrile rubber is mainly produced by low temperature emulsion polymerization. It has excellent oil resistance, high wear resistance, good heat resistance and strong adhesion. Its disadvantages are poor low temperature resistance, poor ozone resistance, poor insulation performance and slightly low elasticity. Nitrile rubber is mainly used to manufacture oil resistant rubber products. NBR is a synthetic rubber prepared by copolymerization of butadiene and acrylonitrile. It is a synthetic rubber with good oil resistance (especially alkane oil) and aging resistance. Acrylonitrile content (%) in nitrile rubber includes 42 ~ 46, 36 ~ 41, 31 ~ 35, 25 ~ 30 and 18 ~ 24. The higher the content of acrylonitrile, the better the oil resistance, but the cold resistance decreases accordingly. It can be used in air at 120 ℃ or oil at 150 ℃ for a long time. In addition, it also has good water resistance, air tightness and excellent bonding performance. It is widely used to make various oil resistant rubber products, a variety of oil resistant gaskets, gaskets, sleeves, flexible packaging, flexible hose, printing and dyeing rubber rollers, cable rubber materials, etc. it has become an essential elastic material in automobile, aviation, petroleum, copying and other industries.