When we buy O-rings, we will buy a lot for later replacement, but please be careful not to throw them away. Improper storage will lead to early aging of O-rings. Finally, it cannot be used.
Let's talk about preservation first;
The rubber O-ring cannot be placed in a humid environment. For example, if you have a cold and humid basement, the water in the air can easily react with the rubber, resulting in viscosity and reduced toughness of the rubber O-ring.
The rubber O-ring can not be placed next to chemicals. The rubber components are easy to be damaged due to improper operation. In this way, the rubber O-ring has defects and can not be used.
The correct storage method should be to remember not to open the outer packing box and protective package before use, and then store it in a clean, ventilated and cool place, so that there will be no major problems.
This is generally required when using. During installation, you can't rush to install it directly. Before installation, the word mount should be wiped clean without impurities. During installation, the lead-in angle of 10-30 degrees should be reserved. Apply lubricant around the rubber O-ring. You can't touch sharp objects. Install it carefully. Then test the sealing condition and remember not to put too much pressure on it
